SMART BLINKY REMOTE™ BATTERY WATERING MONITOR

The SmartBlinky Remote is an electrolyte level indicator designed for lead-acid batteries that do not leave the forklift trucks or for industrial batteries that are charged on multi-level racks.

Perfect for these applications  | 

Forklift   Scrubbers   Aerial Access   Buggies   Marine

Part no.  |  ACC-SREM3

Cost Effective

Over a battery's lifetime, the SmartBlinky Remote saves a surprising amount of time or labour cost and delivers a rapid return on investment. The cost of a single SmartBlinky Remote is a minimal addition to the purchase price of an industrial battery. Still, it allows watering on a labour-saving 'when-needed' basis instead of a 'hit or miss schedule'. This is even more important with batteries that require less frequent water additions.

Simple LED Feedback

The SmartBlinky Remote monitor makes battery watering simple and reliable. It blinks green when electrolyte levels are correct and turns red when water is needed, even visible from across a dark battery room. This saves operators time by showing exactly which batteries require attention, while preventing unnecessary checks and costly overfilling. With SmartBlinky Remote, you’ll always know when to water and when to leave your batteries alone.

Engineered to be Tough

The SmartBlinky Remote battery watering monitor is built to withstand the harsh environment of industrial battery applications. All materials are resistant to corrosion, and the low-profile design protects against damage from battery cables and other hazards. It is designed to last for the life of the battery.

Why Smart Blinky Remote

The SmartBlinky Remote is a mid-range electrolyte indicator that can be edge-mounted for batteries where the top is inaccessible.

Immediate ROI

SmartBlinky Remote is a low-cost solution that quickly pays for itself through reduced labour and maintenance costs.

Patented Design

SmartBlinky Remote is an electronic probe that senses the electrolyte in a cell. The simple, low-cost circuit provides a clear indication when the battery needs water.

Wide Operating Range

Works on all industrial lead acid batteries from 4 to 12 volts, including 6 and 12-volt golf and block batteries.

Edge-Mounted

The SmartBlinky Remote can be edge-mounted on a battery for higher visibility.

Super Bright LED Indicators

A bright flashing green LED means the electrolyte level is OK, while a bright red flashing light means it is time to water the cells.

Easy to Install

A quick and simple installation procedure with reverse polarity protection, and multiple connection types available.

Technical Specifications

LED Indications

Green Flash: Electrolyte Level OK

Red Flash: Fill Soon

System Exposure Temperature

-29° to 71°C  /  -20° to 160°F

Operating Voltage

4.0 to 12.0 VDC, 6.0 VDC Nominal

Forgiveness Zone

14.0 to 16.0 VDC

Permanent Failure

18.0 VDC or greater

Nominal Current

24mA

6V & 12V Monobloc

Yes

Any Cell Installation

No

Reverse Polarity Protection

Yes

Fuses

FlexiTap (Q): 2 x Board, 1 x In-connector

M4 Screw (S): 2 x Board

M10 Bolt (B): 2 x Board

Connection Types

FlexiTap (Q), M4 Screw (S), M10 Bolt (B)

Flame Retardant

UL V-0

Certification

UL, C-Tick, CE Mark

Weight

58.1g / 2.05oz

Housing Dimensions

41mm (L) x 31mm (W) x 10mm (H)  /  1.61in (L) x 1.22in (W) x 0.39in (H)

Generation

Second

Warranty

1 Years

ROI

20 Weeks

Compatible With

Stealth Watering System 

Watering Gun-X 

Water Injector Systems 

FAQs

The SmartBlinky Remote has a solid green light with no flashing. What does this mean?
A solid green LED on the Blinky is potentially indicating that the circuit has failed. We would suggest contacting your local Philadelphia Scientific distributor for further investigation.

The Blinky is flashing red, then when I take it out, it doesn't flash at all. Why is this happening?
The most likely cause of this would be that the negative fuse has ruptured and once replaced should work, if you need any further information we would suggest contacting your local Philadelphia Scientific distributor.

Connect with Our Solutions Team

Phone Number

215-616-0390

Email Address

info@phlsci.com

Office Location

207 Progress Drive
Montgomeryville, PA 18936
USA