Extractor Mounted Water Supply
Lead-acid battery water supply that mounts on an extractor for high speed water on demand operations.
Perfect for these applications |
Forklift
Scrubbers
Aerial Access
Buggies
Marine
Part no. | INJ‐PMWT‐WOT
Durable Design and On-Board Pumping
This robust water supply features a powder-coated industrial steel frame that securely cradles a sturdy 20 US gallon (75.7L) high-density polyethylene tank. The entire unit is secured directly to the back frame of a battery extractor. A submersible pump, mounted inside the tank, delivers the necessary water volume and pressure for the Water Injector System™.
Intelligent Control and Protection
A highly visible control unit is conveniently mounted on top of the tank, providing an on/off switch and power indication. This controller also incorporates intelligent protection features: it shuts the pump off after 10 seconds of non-use to conserve energy and pump life, and includes run-dry protection to prevent damage when the tank is empty.
Steamlining Battery Changeovers
This time-saving equipment is perfect for large battery rooms as it allows operators to water fully charged batteries straight on the extractor during the changeover process. When used with a SmartBlinky electrolyte indicator, it's immediately visible which battery needs water, and the Water Injector System fills the battery to the correct level in under fifteen seconds.
Why Extractor Mounted
Water Supply
With the Extractor Mounted Water Supply, you can water your lead-acid batteries as they are being changed.
Operational Friendly
18 ft (5.5m) of 5/8 in (1.5 cm) industrial high-output hose is supplied with each unit.
A/C powered submersible pump
The A/C powered submersible pump is powered by the battery changer.
Compatible with Other Watering Systems
This water supply is also compatible for use with the Watering Gun and Stealth Watering System™. Additional adaptors may be required.
Designed to fit
Water Injector Systems
Technical Specifications
|
System Exposure Temperature |
35°F to 160°F / 2° to 71°C |
|
Power Source |
110 VAC / 8.5 Amps |
|
Output Hose Length |
18 ft / 5.5 m |
|
Output Hose Size |
1 in / 2.54 cm |
|
Weight |
53 lb / 24 kg |
|
Product Height |
39 in / 99 cm |
|
Product Length |
14 in / 35.6 cm |
|
Product Width |
19 in / 48.26 cm |
|
Capacity |
20 gallons / 75.7 L |
|
Range |
30 ft / 9.15 m |
|
Power Cord Length |
25 ft / 7.6 m |
|
Horse Power |
3/4 H.P. |
|
Notes |
Used for filling the Water Injector System™ from a battery extractor. |
Resources
Related Products
Pump Controller for Extractor-Mounted Water Supply
Conveniently water batteries where they are being changed.
HydroCart Max
This 20 gallons unit easily transports water to your batteries.
HydroCart Max DC Watering Cart
This 20 gallons unit easily transports water to your batteries.
Connect with Our Solutions Team
Phone Number
215-616-0390
Email Address
info@phlsci.com
Office Location
207 Progress Drive
Montgomeryville, PA 18936
USA

