Battery Watering Gun-X
The next generation in Watering Gun Technology. The world’s fastest, most durable and best-selling watering gun.
Perfect for these applications |
Forklift
Scrubbers
Aerial Access
Buggies
Marine
Part no. | GUN-XEU
The Essential Tool for Battery Room Maintenance
The Philadelphia Scientific Battery Watering Guns are the critical maintenance tool no battery room should be without. Since 1983, it has been the world's most popular solution for managing flooded-cell batteries. Operators connect the gun to a standard water hose or a Deionizer, insert the tip into the cell, and squeeze the ergonomic handle. This design immediately enhances operator safety by keeping personnel away from corrosive battery hazards, while the tool's non-electric, mechanical shut-off ensures it is highly reliable.
Automatic Accuracy & Proven Cost Savings
The core benefit of this tool is its automatic shut-off mechanism, which instantly stops the flow of water at precisely the correct electrolyte level. This not only significantly improves filling accuracy but also eliminates the common risk of overfilling and spillage, accelerating the overall watering process. By replacing the cumbersome and error-prone process of hand watering, the gun is proven to save money, with the manufacturer citing labour cost reductions of up to $150 a year for each 18-cell battery.
Why Battery Watering Gun-X
The Gun-X speeds up battery watering, improves filling accuracy and operator safety.
Ergonomically Designed
The easy-squeeze, rugged handle and 45° nozzle angle make this gun very comfortable to use.
Flow Diffuser
Converts the rapid flow to a gentle spray and protects the nozzle from damage.
Reliable Shutoff Mechanism
The shut-off mechanism has been tested to 1 million cycles and proven in hundreds of thousands of tough applications worldwide. Powered by the water itself, it has no solenoids, no electronics and no wiring.
Superior Strength
Built from rugged, engineered ABS plastic.
Fast but Gentle
The flow rate is 6.4L per minute, which is fast enough for the largest cells. Yet the flow is gentle enough to fill a coffee mug.
Easy Installation
Attach the Gun-X in seconds to any standard garden hose, one of our HydroFill Watering Carts or our HydroPure Deionizer System, and you have a fully operational battery filling system. We always recommend using deionised water to fill a lead acid battery.
Technical Specifications
|
Input / Operating Pressure |
< 80 psi / < 5.515 bar |
|
Flow Rate |
1.7 gpm / 6.4 lpm |
|
System Exposure Temperature |
35° to 160°F / 2° to 71°C |
|
Weight |
1.5 lb / 0.68 kg |
|
Product Height |
7 in / 17.8 cm |
|
Product Length |
15.5 in / 39.37 cm |
|
Product Width |
1.5 in / 3.8 cm |
|
Shut Off |
Automatic Shut-Off |
|
Nozzle Angle |
45° |
|
Nozzle Diameter |
0.67 in / 17 mm |
Resources
Related Products
GUN-S
Watering gun for stationary battery applications.
Gun-RR
Watering gun for railroad battery applications.
Flip-Top Vent Caps
With the patented Flip-Top vent caps, you will stop wasting time with screw-on, screw-off vent caps.
Connect with Our Solutions Team
Phone Number
215-616-0390
Email Address
info@phlsci.com
Office Location
207 Progress Drive
Montgomeryville, PA 18936
USA

