HydroPure™ Deionizer System
Maximise battery performance with pure water from the tap.
Perfect for these applications |
Forklift
Scrubbers
Aerial Access
Buggies
Marine
Part no. | PS-300
Ease of Operation
This system comes with everything needed to produce pure water straight from the tap. It operates at full-line pressure, dispensing purified water directly from the deionizer. The cartridges can be replaced quickly without the need for tools, and the included 20ft output hose provides maximum flexibility and convenience for watering.
High Capacity
The amount of purified water produced by the HydroPure cartridge will average about 600 gallons, but this will vary with the quality of the incoming tap water, from as much as 1,500 gallons to as little as 250.
Exclusive Purity Light Indicator
The dual-colour light indicator signals when it’s time to change the cartridge, and no light means the batteries of the purity light should be changed. The system comes with two D-cell batteries that last up to two years, eliminating the need for an AC power source. This design keeps electricity and water separate, ensuring greater safety for employees.
Exclusive Purity Light
A conductivity meter continuously monitors the output water and signals when it is time to change the HydroPure cartridge.
Why HydroPure Deionizer
Professional quality deionizers: Not just a filter, which only removes particles, but a real ion-exchange medium which electrostatically removes dissolved impurities. Purity is comparable to distilled water and ideal for batteries.
Ease of Installation
A mounting plate with hose hanger allows easy installation, and the cartridge connects in seconds using standard hose fittings and quick-connect couplings. No plumber is needed, and replacement is simple with non-toxic, easily disposable cartridges.
Pressurized System
Unlike some lab-type systems, the HydroPure Cartridge takes full-line pressure up to 80psi. So the water flow is fast enough to use directly with the Battery Watering Gun.
Low Cost
Cartridges are available for a fraction of the cost of distilled water, enabling battery users to produce their own pure water for less money than it would cost to buy it.
High Capacity
A single cartridge will produce an average of 600 gallons of purified water. The amount will vary with the quality of the incoming tap water, from as much as 1,500 gallons to as little as 250. Most battery manufacturers recommend that water should have no more than 50 parts per million total dissolved solids to get full battery life.
Watering Gun Available
An optional battery watering gun is available, enabling a battery to be filled directly from the deionizer.
Purity Chart
The following chart can be used to determine how many gallons of pure battery water
can be obtained from one cartridge based on the purity of the incoming tap water.
Purity LevelTotal Dissolved Solids**Cartridge Capacity |
|
Good PPM* 50 75 Grains 3 4 uS/cm 28 42 U.S. Gallons 1440 960 Liters 5,451 3,634 |
|
Average PPM* 100 120 150 Grains 6 7 9 uS/cm 56 67 84 U.S. Gallons 720 600 480 Liters 2,725 2,271 1,817 |
|
Poor PPM* 200 250 Grains 12 15 uS/cm 112 140 U.S. Gallons 360 288 Liters 1,363 1,090 |
|
**TDS: Total Dissolved Solids in the water |
Technical Specifications
|
Input / Operating Pressure |
< 80 psi / < 5.52 bar |
|
Flow Rate |
0.5 gpm with the provided restrictor / 1.89 lpm |
|
System Exposure Temperature |
35° to 160°F / 2° to 71°C |
|
Power Source |
Purity Light: 2 D-Cell Batteries (included) |
|
Purity Light Setting |
50 ppm total dissolved solids |
|
Input Hose Size |
3/8 in / 1.3 cm |
|
Input Hose Length |
10 ft / 3.0 m |
|
Output Hose Size |
3/8 in / 1.3 cm |
|
Output Hose Length |
20 ft / 6.0 m |
|
Weight |
24 lb / 10.8 kg |
|
Product Height |
44 in / 111.7 cm |
|
Product Length |
7 in / 17.8 cm |
|
Product Width |
6 in / 15.2 cm |
|
Capacity |
600 gallons / 2270 litres |
Resources
Compatible With
FAQs
I have installed the HydroPure Deionizer, but the purity light is flashing red. Why is this?
Before first use, run 10 gallons / 40 litres of water and check again.
If you are using the deionizer to fill a watering cart or a bucket, be sure to have the flow restrictor connected to the end of the output hose. The water needs enough time to interact with the resins inside the cartridge to deionise effectively.
If the problem persists, remove the purity light from the deionizer and leave it to dry in open air for 30 minutes. If the light is still flashing red in the open air, you will need to replace the purity light.
If the purity light flashes green in the open air and then flashes red when reattached to the cartridge, please get in touch with customer service to help diagnose the issue.
How much water can I expect out of one cartridge?
The capacity of the cartridge is directly related to the purity of the incoming water, or TDS level. To determine what the capacity will be precisely, you must test the incoming water with a TDS meter. Using the Cartridge Output Calculator at the bottom of the page, enter the resulting Parts Per Million data to see how many gallons/litres you will get from your cartridges.
Can I connect the Deionizer to a Water Injector System?
No, the Injector system requires consistent 25-35 PSI to function correctly, which the deionizer cannot produce.
What is the shelf life of the cartridge?
The deionizer cartridge has a shelf life of 5 years.
How long can I extend the length of the output hose?
If connecting to a Stealth system, the maximum length is 100 ft.
If connecting to a Watering Gun (GUN-X, GUN-S, GUN-RR), you must confirm that your flowing water pressure is at least 30 PSI, which will allow you to extend the output hose up to 100 ft.
Related Products
HydroPure™ Deionizer Cartridge
High capacity, replacement Deionizer cartridge.
HydroPure Mobile Dual Deionizer Cart
The Mobile Deionizer System is designed to bring pure, battery-ready water right to where you need it.
Connect with Our Solutions Team
Phone Number
215-616-0390
Email Address
info@phlsci.com
Office Location
207 Progress Drive
Montgomeryville, PA 18936
USA



